Call the Dryer Repair Orlando Counts On
Dryer Repair Orlando
You know that moment when you’re expecting warm, fluffy towels but instead find a soggy heap of disappointment? That’s when the dryer, your silent laundry day hero, has officially thrown in the towel. We’re AMB Works, and we know how frustrating that is. Especially in Orlando, where “air-drying” outside just means letting your clothes soak up some swampy humidity. When your dryer quits on you, we’re the team to call for fast, honest, and top-quality dryer repair Orlando homeowners can count on.
As part of our broader appliance repair Orlando services, our techs have fixed everything from dryers that hum louder than an airboat to machines that just won’t start. Whether it’s a stubborn heating element or a drum that’s more squeaky than spinny, we’ve seen it and fixed it all. So take a deep breath, toss out the dryer sheets, and let us help bring the heat back to laundry day.
From Whirlpool to Samsung, We Fix Them All
Dryer Repair Orlando Brands We Service
Not all dryers are created equal and some are just plain fussy. Lucky for you, our team knows their way around just about every make and model. From high-end units with Wi-Fi and steam settings to good old dependable workhorses, we’ve got the experience to handle them all.
We regularly service major dryer brands like Whirlpool, LG, Samsung, GE, Maytag, Electrolux, Kenmore, and more. No matter what badge is on the front of your machine, AMB Works is ready to help bring it back to life.
- Amana
- Bosch
- Electrolux
- GE
- Kenmore
- LG*
- Maytag
- Samsung
- SpeedQueen
- Summit
- Whirlpool
*Factory Authorized Service






























Dryer Acting Up? Here’s What’s Usually to Blame
Dryer Issues We Fix All the Time
Dryer Won’t Start
Caused by: Blown fuse, door switch failure, or control board issues
If you press the start button and get nothing but silence, it’s usually one of these:
- Tripped circuit breaker
- Faulty start switch
- Burned-out thermal fuse
We’ll test each part and get your dryer humming again.
Dryer Takes Forever To Dry
Caused by: Blocked vents, failing heating element, or moisture sensor issues
If drying takes two or three cycles:
- Check for lint buildup in vents
- A faulty moisture sensor may cut the heat too soon
- The heating element might not be delivering full power
Dryer Is Noisy
Caused by: Worn drum rollers, blower wheel issues, or loose belts
- Thumping usually means a worn drum roller
- Squealing or screeching points to the idler pulley or belt
- Grinding? You need help right away
Dryer Drum Won’t Spin
Caused by: Broken belt or motor failure
- A snapped belt is the usual suspect
- A burned-out motor is rarer but still possible
- Either way, this fix needs tools and experience
Burning Smell Coming From Dryer
Caused by: Lint buildup, overheating parts, or faulty wiring
- First step, stop using it immediately
- Lint inside the dryer cabinet can catch fire
- Overheating elements or melted wires require urgent repair
Dryer Shuts Off Mid-Cycle
Caused by: Overheating, faulty thermostat, or a clogged vent system
If your dryer keeps stopping before the clothes are dry, here’s what might be going wrong:
- The machine is overheating and shutting down as a safety measure
- A faulty thermostat might be misreading the temperature
- Clogged vents can restrict airflow and trigger auto shut-off
This problem can get worse over time, so it’s best to get it checked out before the dryer stops altogether.
Got Questions? We've Got Straight Answers
Dryer Repair Orlando FAQs
When your dryer breaks down, it’s not just an inconvenience. It’s a total disruption. Suddenly, that pile of wet laundry becomes a minor crisis. Should you fix it? Try troubleshooting first? Will it cost more to repair than replace? We hear these questions all the time from folks searching for dryer repair Orlando can rely on, and we’re here to help cut through the confusion with honest answers and expert advice.
Most dryer problems don’t start big. It might begin with clothes taking a bit longer to dry or a strange burning smell that you think (hope) is just a sock stuck somewhere. Knowing when to call in help versus when to check the lint trap or reset the breaker can save you time, money, and a load of headaches. Whether you’re trying to decide if your dryer is worth saving or just want to know how long repairs take, our FAQ section is here to guide you through the noise.
How Can I Tell If My Dryer Is Worth Repairing?
If It’s Under 10 Years Old, It’s Probably Worth Fixing
- Dryers typically last 10 to 13 years.
- If the repair cost is less than 50 percent of a new unit, repair is often the smarter choice.
- Consider repair if the problem is common and fixable like a faulty thermostat or a blown fuse.
Why Isn’t My Dryer Heating Up?
Usually It’s A Blown Thermal Fuse Or Heating Element
When a dryer runs but doesn’t produce heat:
- Check the thermal fuse, a common fail-safe part.
- The heating element might have burned out, especially with frequent use.
- Circuit breakers or gas valve issues could also be the culprit.
Can I Fix My Dryer Myself?
You Can… But You Also Might Make It Worse!
- Cleaning the lint trap and checking the breaker is fine for DIY.
- Opening up the machine, messing with wiring, or replacing internal parts should be left to the pros.
- DIY attempts can void warranties and create safety hazards if done wrong.
How Long Do Dryer Repairs Take?
Most Repairs Take 1 to 2 Hours Unless A Part Needs Ordering
- Simple fixes like replacing a belt or fuse are usually done same-day.
- If we have the part in stock, you’re in luck.
- Special orders or rare parts might add 1 to 3 days to the timeline.
what we've been up to
recent Dryer repair jobs
Wondering if your dryer issue is something we handle? Take a look at some of our recent service calls around Orlando. From Lake Nona to Winter Park, we’re always out and about helping folks get their laundry rooms back in business. While we won’t get into the nitty-gritty details, this list gives you a sense of the kind of dryer repair work AMB Works tackles every day, quick, clean, and done right the first time.