Stop the Kitchen Chaos with AMB Range Repair
Range Repair Orlando
When your range stops working, it’s not just a minor hiccup. It delays dinner, disrupts your schedule, and leaves you scrambling for a backup plan. Whether it’s a burner that won’t light or an oven that stays stone cold, the kitchen quickly becomes a place of frustration instead of comfort.
At AMB Works Appliance Repair Orlando, we’re here to change that. Our team delivers dependable range repair Orlando homeowners can rely on to get things back on track. We handle gas and electric models, pinpoint the problem fast, and fix it right the first time so you can get back to cooking without the stress.
We Service all main Brands
Range Brands we Service in orlando
When it comes to range repair Orlando residents need, we’ve got experience across the board. Our team works with nearly every major brand, from high-end to household staples.
Whether your unit is digital and fancy or basic and built to last, we can handle it. We regularly repair:
- Amana
- Blodgett
- Bosch
- Convotherm
- Dacor
- CPG
- Frigidaire
- Electrolux
- GE
- GE Monogram
- Hisense
- Kenmore
- KitchenAid
- Lacanche*
- LG*
- MainStreet
- Midea
- Pitco
- Samsung
- Sharp*
- Summit
- Thermador
- TurboChef
- Viking
- Vulcan
- Whirlpool
*Factory Authorized Service






























The Kitchen’s Acting Up Again? Here’s What Might Be Going On
Common Range Repair Problems We Fix
Burner Won’t Ignite
If you turn the knob and hear the click but no flame appears, chances are the igniter is either dirty or damaged. In some cases, the burner ports are clogged with food debris or grease, which blocks the gas flow. A faulty spark module can also be the culprit. We’ll take a look, clean or replace the part, and get that burner working again.
Oven Isn’t Heating
A cold oven usually means a broken igniter or a failed heating element. In gas models, a weak igniter won’t get hot enough to open the gas valve. In electric ovens, it’s often the bake or broil element that’s to blame. These are common issues that we can usually fix in a single visit.
Range Keeps Clicking
That constant clicking sound when the burner is off is usually caused by moisture or a stuck ignition switch. Water from a recent spill or deep clean might have seeped into the switches, causing a short. If drying it out doesn’t solve the problem, we’ll inspect the switch harness and replace any components that aren’t working properly.
Uneven Cooking
If one side of your dish is undercooked while the other is burned, your oven probably has a faulty temperature sensor or thermostat. Sometimes the oven isn’t cycling the heat correctly, or the door seals are worn out and letting heat escape. Whatever the cause, we’ll make sure your oven cooks evenly again.
Oven Overheats or Burns Food
If your oven is turning your meals into charcoal, it’s likely running hotter than it should. This usually points to a faulty thermostat or a malfunctioning temperature sensor that’s feeding the control board incorrect readings. The oven might think it’s maintaining the right heat when it’s actually soaring well above the set temperature. We’ll test the sensor, recalibrate or replace the thermostat if needed, and get your oven back to baking instead of incinerating.
Control Panel Doesn’t Respond
When your range display goes blank or the buttons stop working, it’s often due to a failed control board or a power supply issue. It could also be a blown fuse or a bad connection inside the unit. We’ll diagnose the problem, test the components, and replace whatever’s necessary to restore full control.
Frustrated With Your Range? Check out these FAQs
Range Repair FAQs
We know what it feels like when your range breaks down. Whether it’s a last-minute meal gone wrong or a holiday dinner on the brink, you need answers fast. That’s why we pulled together some of the most common questions we hear from homeowners all across Orlando looking for dependable range repair Orlando can trust.
This section is here to help you understand what’s going on, what you can do about it, and whether it’s time to call in the pros. Take a deep breath. We’ve got your back.
How Do I Know If My Range Is Worth Repairing?
Fixing Is Usually Cheaper Than Replacing If Your Range Isn't Too Old
Many issues can be resolved quickly and affordably, especially if:
- The range is less than 10 to 12 years old
- The damage is limited to a specific component like an igniter or heating element
- You don’t have plans to upgrade your kitchen soon
In most cases, a repair will cost much less than buying a new unit.
What Should I Check Before Calling For Repair?
A Few Simple Steps Could Save You Time And Money
Here are a few things you can try on your own:
- Make sure the power cord is securely plugged in
- Check that the breaker hasn’t tripped
- Confirm your gas supply is turned on if you have a gas range
- Clean the burner ports to remove buildup
If everything looks normal and it’s still not working, give us a call.
Can I Use My Range If Only One Burner Is Out?
You Can, But It Might Be Risky
While it's tempting to use the working burners, it's important to consider:
- A broken burner might be a sign of a larger electrical or gas issue
- Ignoring the problem could lead to more failures down the line
- There may be a safety concern if gas is leaking or electricity is sparking
It’s always better to fix the issue before it becomes a bigger one.
How Often Should I Clean My Range?
Regular Cleaning Prevents Most Performance Issues
Keep things running smoothly by:
- Wiping up spills as they happen, especially acidic or sticky ones
- Cleaning burners and igniters once a month
- Deep cleaning the oven every couple of months to avoid buildup
Clean appliances perform better and last longer.